OccuPros Safety Academy | Online Theory
Rooftop Safety and Leading Edge Work
A roof is a work surface with no walls and an edge that does not forgive a single wrong step. This course teaches you to read the roof, control the edge, and get yourself and your crew back down safely.
A roof looks like solid ground until the moment it is not. It is flat, or close to it, you can stand on it, walk on it, set your tools down on it, and for the most part it holds. That is exactly what makes it dangerous. The hazard on a roof is almost never the part you are standing on. It is the edge you cannot feel until you are past it, the skylight that looks like a panel and gives way like glass, the patch of frost you did not see, the gust that arrives while your hands are full. Falls from roofs and other elevated surfaces are among the leading causes of death in construction, and they almost always come down to the same handful of failures: no protection at the edge, an unguarded opening, a surface nobody checked, a tie-off nobody set.
Here is the part worth holding onto: roof falls are highly preventable, and the protections are well understood. Guardrails, warning lines, personal fall arrest, covered openings, marked skylights, sound anchors, a rescue plan ready before anyone goes up. None of it is exotic. All of it is the difference between a normal day and the worst day a family ever has. This course takes the roof apart so you can see the hazards before they find you, choose the right protection for the work, and keep the person working beside you on the right side of the edge.
What you will learn
- Why falls from roofs are so deadly, and why the 6-foot trigger in construction means protection starts long before you feel exposed.
- What OSHA 29 CFR 1926 Subpart M requires for fall protection on low-slope and steep roofs, leading edges, and roof openings.
- How guardrails, warning lines, safety monitors, and personal fall arrest compare, and when each one fits the work.
- How to identify a real anchor point, tie off correctly, and keep fall distance and clearance under control.
- How to handle skylights and openings, fragile and load-limited roofing, weather and wind, debris and housekeeping at height, and rescue planning.
Who this is for
Aligned with OSHA 29 CFR 1926 Subpart M, Fall Protection, for roofing and leading edge work. Online awareness and information training that supports your employer’s required site-specific and hands-on fall protection training and is not a substitute for it. OccuPros | (469) 746-4040 | occupros.com | Every Worker Home Safe.
Course References
- OSHA standards and guidance applicable to Rooftop Safety & Leading Edge Work
- Employer written safety procedures and site-specific plans
- Manufacturer instructions, SDSs, permits, inspection forms, and emergency action plans when applicable
Applicable Industries:
OccuPros Safety Instructor Team
Every OccuPros course is developed and reviewed by our team of Certified Safety Professionals (CSP) and Safety Management Specialists (SMS) with 15+ years of field experience across construction, oil & gas, manufacturing, and general industry. Our instructors don't just teach safety - they've managed safety programs on active jobsites, conducted OSHA compliance audits, and published 184 safety course topics nationwide.
Before you buy
The practical questions, answered plainly.
Do I get a certificate?
Yes. When you finish the course and pass the assessment, your certificate of completion is available to download immediately from your dashboard. It carries a verification number.
How long do I have access?
Access to this course does not expire. It is self-paced, so you can start, stop and resume whenever you like, and your progress is saved between sessions.
What if I fail the assessment?
You can retake it. Knowledge checks run through the course and the final assessment draws from a larger question bank, so a retake will not simply repeat the same questions.
Does this replace hands-on training?
This course delivers the knowledge portion. Site-specific procedures, equipment-specific practice and any required practical evaluation remain your employer's responsibility, and the course is explicit about where those lines fall.
How often does this training need repeating?
The recommended refresher cadence for this topic is annually. Retraining is also triggered by a change in process or equipment, or by an observed gap in an employee's knowledge.
Can I buy this for my whole crew?
Yes. Choose "My team" on this page to buy seats instead of a single enrolment. You become the team administrator, assign seats from your Team Portal as people join, and volume pricing applies automatically at 5 seats and again at 10.
Frequently Asked Questions
What does the Rooftop Safety & Leading Edge Work course cover?
It covers fall hazards on roofs and at leading edges, including guardrails, personal fall arrest systems, warning lines, and safety monitoring. You will learn about hole covers, skylights, and roof edge protection. The training reflects general OSHA fall protection requirements under 29 CFR 1926 Subpart M.
Who should take rooftop and leading edge safety training?
It is designed for roofers, HVAC and solar installers, maintenance workers, and any crew performing tasks on or near roof edges. Supervisors overseeing rooftop work will also find it valuable.
Can I enroll my whole crew?
Yes. OccuPros offers group and team seats so you can purchase training for multiple workers and manage them together. Contact us for team pricing.
Do I get a certificate when I finish?
Yes. You receive a digital Certificate of Completion that you can download and print as soon as you complete the course.
